|
|
|
|
|
Four sets of plug-in life testing machines are applicable to various connector products and small electronic products such as mobile power supply
Plug and pull life test of the product. This machine can test multiple products at the same time, which is a necessary high for plugging life test
Cost... |
|
|
|
|
|
|
|
|
Application
HMWTECH’s Shock Test System used to measure and determine the impact resistance of a product or package. It is mainly used to evaluate the reliability of the function and the integrity of the structure of the test product under an impact environment. Suitable for impact testing of aero... |
|
|
|
|
|
|
|
|
Temperature Cycling test chamber (also called the thermal cycling test chamber) is performed on materials to determine the resistance of exposure to alternating extremes of high and low temperatures.
Standards
IEC 62133-2017
UL 1642
UN 38.3
Performance parameter... |
|
|
|
|
|
|
|
|
Application
HMWTECH’s battery washing test chamber consisting of test chamber and washing chamber under the test chamber. Moreover, it motorized rotary propeller mounted inside of the test chamber and on the internal wall of test chamber, the drying system is mounted. This battery washing tester i... |
|
|
|
|
|
|
|
|
Test requirements
IEC 62133-2017
Performance parameters
Model
HMBE6045W
Temperature Chamber Technical Parameters
Temperature Range
-10℃ ～ +80℃（Controllable）
Temperature Rising Rate
Ave.3℃/min（-10℃ to 80℃、Nonlinear No-load）
Temperatur... |
|
|
|
|
|
|
|
|
Application
HMWTECH's Battery Crush Nail Penetration Tester is used to simulate the battery penetration test of a sharp object during packaging, transportation, storage, use and disposal. The test results can be used to evaluate the safety performance of the battery.
Test requirements
UL 1642
... |
|
|
|
|
|
|
|
|
Application
HMWTECH’s battery projectile / burning test chamber is suitable for testing the flame resistance and flammability of various consumer batteries, such as mobile phones and notebook computers. Easy to operate, safe and reliable, it is an ideal battery burning test equipment.
Related Sta... |
|
|
|
|
|
|
|
|
Application
HMWTECH’s battery drop test chamber is used to test the drop impact performance of large, heavy-duty packaging products by simulating real surface, edge, and corner differences. It is mainly used to test the anti-drop ability of packaging products during transportation, loading and unl... |
|
|
|
|
|
|
|
|
Application
The battery impact tester tests the safety of the battery through different weights, different heights and different impact areas. After a series of tests on this battery impact tester, the battery must not have flame or explosion. This device is a kind of battery testing equipment pop... |
|
|
|
|
|
|
|
|
Thermal abuse test chamber is suitable for standard IEC 62133-2017, UL 1642 and GB 31241-2014.
Standards
IEC 62133-2017
UL 1642
GB 31241-2014
Main technical parameters
Model
HMBE8103
Structure
All-in-one structure, the door uses explosion-proof lock + explosion-pro... |
|
|
|
|
|
|
|
|
The temperature control battery short circuit test chamber is designed to comply with the standard. According to the short-circuit test requirement, the short-circuit must be less than 5 mΩ to achieve maximum current.
Application
Battery large current short-circuit machine is designed to... |
|
|
|
|
|
|
|
|
Application
This battery crush test chamber is used for battery crush tests. This battery testing equipment simulates the conditions of the battery crushing and displays communication results. Besides, it has excellent security measures, such as an Explosion-proof pressure relief device, Smoke exh... |
|
|
|
|
|
|
|
|
Servo Computer Battery Crush Test Chamber simulates the situation in which various types of lithium batteries are squeezed during use. Artificially present different conditions that may occur when the battery is squeezed.
Application: Single-cell crush test (cylinder, pouch, prisma... |
|
|
|
|
|
|
|
|
The digital display weight type surface resistance tester/surface impedance tester measures the resistance of anti-static products to detect the anti-static ability of anti-static products. This machine follows the ASTM standard D-257 test method, and only two Place the heavy hammer on the surface ... |
|
|
|
|
|
|
|
|
The high-current short-circuit device is designed according to the requirements of various battery short-circuit test standards; according to the standard, the short-circuit device must be less than 5mΩ to obtain the maximum short-circuit current required by the test; in addition, the circuit desig... |
|
|
|
|
|
|
|
|
The safety performance of the battery is checked by the extrusion test. After the test, the battery should not fire or explode; it is also an indispensable testing equipment for battery manufacturers and research institutes.
Features
1. The wire jacket is covered with a metal fireproof tub... |
|
|
|
|
|
|
|
|
Battery washing test machine, the frame body is equipped with a test box, the lower part of the test box is equipped with a washing box, the test box is equipped with a rotating paddle, the inner side of the test box is equipped with a drying device, and the input end of the rotating paddle is conn... |
|
|
|
|
|
|
|
|
Test products such as mobile phones, the impact resistance test of the falling of the luggage and the actual situation of the damage of the falling during the simulation of the transportation after packaging. The drop point can be set as the diamond, corner or surface of the box.
Standards complia... |
|
|
|
|
|
|
|
|
The high-current short-circuit device is designed according to the requirements of various battery short-circuit test standards; according to the standard, the short-circuit device must be less than 5mΩ to obtain the maximum short-circuit current required by the test; in addition, the circuit desig... |
|
|
|
