| Model |
HMCCT510NS |
| Internal Size |
W1200mm*H500mm*D850mm |
| External Size |
W2150mm*H1550mm*D1200mm |
| Volume |
Test chamber volume: 500 liters
Brine tank volume: 90 liters |
| Temperature control method |
The use of anhydrous temperature control and heating on five sides greatly improves the uniformity and reduces the influence of water vapor on the PH value. This ensures that the PH value of the salt spray does not change, and meets the latest test standard methods at home and abroad. |
| Condition requirements |
Air compressor (5-6kg/cm2) |
| Temperature range |
Temperature: 35°C to 50°C
Saturated barrel temperature: 47°C to 63°C |
| Temperature fluctuation |
Temperature fluctuation: ±0.5ºC
Saturated barrel temperature fluctuation: ±0.5 |
| Temperature deviation |
Temperature: ≤±1ºC |
| Temperature uniformity |
≤2ºC |
| Subsidence |
1~2ml/80cm² 1hr |
| Spray method |
Pneumatic spray tower method
Optional: continuous/periodic spray (optional), optional test time: 1~999H, M\S (adjustable) |
| Spray pressure |
1±0.1kg/cm² |
| Defogging method |
The gas generated by the air compressor enters the working room to disperse the excess mist, and after the gas passes through the box
The exhaust hole on the back is exhausted so that the cover is free of fog and condensation, and the corrosion condition in the working room can be clearly observed. |
| Inner box material |
Made of pp temperature and impact resistant board. Thickness 10mm |
| Outer box material |
Made of pp temperature and impact resistant board. Thickness 6mm |
| Cover material |
It is made of pp temperature-resistant and impact-resistant board, with a thickness of 12mm. The viewing window is convenient for observing the test condition of the sample. The box cover and the box body are sealed with water to prevent the leakage of salt spray. inside, to avoid dripping on the test piece) |
