This machine can be used for the 3-point/4 point resistant, compression, bending, stretching test of various metals, rubber, plastics, glass, display, materials and products.
Instructions
The 3-point/4 point resistant testers machine is suitable for bending test of metal, nonmetal and composite materials. The three-point resistant test meets GB/T1449-2005 and GB/T9341-2008 test methods and standards, and the four-point resistant test meets ASTM D6109-2010 test methods and standards. It can also carry out tensile, compression, shear, tear, peel and other mechanical properties tests.It can automatically detect the maximum force value, yield force value, breaking force value, maximum deformation and yield elongation of the material.According to GB, JIS, ASTM, DIN and other standards, the bending strength, bending modulus, tensile strength, yield strength, breaking strength, maximum elongation, yield elongation, breaking elongation, constant elongation stress, constant stress elongation, elastic modulus and other parameters can be calculated automatically.
Software
Measurement and control system is specially designed for microcomputer electronic universal testing machine, microcomputer hydraulic universal testing machine and microcomputer press.It can be used for tensile, compression, bending, shearing, tearing and stripping tests.PC and interface board are used to collect, save, process and print test results.The maximum force, yield force, average stripping force, maximum deformation, yield point, elastic modulus and other parameters can be calculated.Curve processing, multi-sensor support, graphical interface, flexible data processing, MS-Access database support, make the system more powerful.
According to the standard
ISO 7500-1 , JJG475-88 , ASTM E4 , DIN5122 , JIS B7721/B7733 , EN 10002-1,EN 1002-2, BS1610,GB T228
SPECIFICATION
|
Capacity selection
|
10N,20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN (optional dual capacity)
|
|
Display
|
Computer display mode
|
|
Force resolution
|
1 / 500,000
|
|
Strength precision
|
0.3%
|
|
Stroke resolution
|
0.005mm
|
|
Control method
|
Full computer operation
|
|
Test distance
|
350mm (acceptable custom)
|
|
Test width
|
420mm (acceptable)
|
|
Test speed
|
0.01 ~ 500mm / min computer settings, with fixture up and down fast adjustment button
|
|
Force unit conversion
|
Kgf, N, Ibf, g, ton, Mpa
|
|
Stop mode
|
Overload stop, emergency stop button, specimen failure Automatic shutdown, upper and lower limits set automatic shutdown, automatic reset function
|
|
Machine size
|
90 × 45 × 97cm (W × D × H)
|
|
Motor
|
Servo motor drive, synchronous wheel and precision ball screw drive
|
|
Power
|
400W
|
|
Machine weight
|
About 80kg
|
|
Power supply
|
220V 50 / 60HZ 10A
|
|
Standard configuration
|
A set of Fixture, computer software, USB computer connection
|
|
Option
|
Personal computer
|
