This machine is developed and designed for 165~180° peeling test. It adopts microcomputer chip control and load cell to read data. It can be connected to a computer for two-way transmission. All designs are based on humanity (with powerful computer software, it can The test results are drawn, printed, and compared).
Software Function
Test & Control System is designed for PC Electronic Universal Testing Machines, PC Hydraulic Universal Testing Machines and PC Compression testers; Can conduct tensile, compression, bending, shearing, tearing and peeling test; The PC and interface board are used to collect, save, process and print the test results of the data; It can calculate parameters such as maximum force, yield force, average peel force, maximum deformation, yield point, elastic modulus, etc.;It can be used for curve processing, multi-sensor support, graphical interface, flexible data processing, MS-ACCESS database support, making the system more powerful.making more powerful function of system.
SPECIFICATION
| Capacity |
10N, 20N, 50N, 100N, 200N (can select double capacities preparation) |
| Display |
Computer display mode |
| Force Resolution |
1/500,000 |
| Force Accuracy |
≤±0.3% |
| Stroke Resolution |
0.005mm |
| Control Mode |
All computerized operation mode |
| Test Stroke |
500mm |
| Test Width |
￠140mm |
| Test speed |
5~500mm/min, can set by computer, with up & down fast adjustment button of grips |
| Force Unit Switch |
Kgf, N, Ibf, g, ton, Mpa |
| Stop Mode |
Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function |
| Machine Dimension |
97 x 40 x 30mm (W×D×H) |
| Machine Drive |
Stepper motor drive, synchronous wheel and precision ball screw drive |
| Power |
180W |
| Machine Weight |
Approx 45kg |
| Power Supply |
220V 50/60HZ 5A |
| Standard Device |
1 set of grips, computer software, USB computer connection wire |
| Optional |
Personal computer |
