DESCRIPTION
Constant temperature and humidity test box is also called constant temperature test box, constant humidity test box, damp heat test box, constant damp heat test box, linear constant temperature and humidity test box. Equipment for testing the performance of materials in various environments and testing various materials for heat resistance, cold resistance, dry resistance and humidity resistance. It is suitable for testing the quality of products such as electronics, electrical appliances, communications, instruments, vehicles, plastic products, metals, food, chemicals, building materials, medical treatment, and aerospace.
Standard and test methods
Satisfy the test standards: Meet the relevant requirements of accelerated and long-term tests in the National Pharmacopoeia, FDA, ICH and other relevant standards.
Manufacturing execution standards (technical conditions): refer to GB10586.
Equipment usage conditions
Environment temperature: 5-30℃ Environmental humidity: ≤85%R.H.
SYSTEM
Air conditioning and refrigeration system
Air conditioning mode
|
Forced ventilation and internal circulation to balance temperature and humidity
|
Air circulating plant
|
Blower fan system×1
|
Heating method
|
Electric heaters
|
Humidification method
|
Electric steam humidifier (with 1 set)
|
Water supply method
|
Automatic circulating water supply system, equipped with a special water tank with automatic submersible pump and water inlet pipe system device
|
Cooling method
|
Low-temperature refrigeration compressor unit, cascade control, environmentally friendly refrigerant R404
|
Cooling method
|
Wind cooling
|
Equipment noise
|
≤65dβ
|
Chamber structure
Box material
|
Anti-corrosion thickness of cold sheet electrostatic powder baking paint 1.0mm
|
Inner wall material
|
Matte surface SUS304# stainless steel plate thickness 1.0mm
|
Gate observation window
|
Four layers of insulating glass
|
Test hole
|
ф50 Do verification hole
|
Studio lighting
|
LED lighting
|
Stainless steel carrier
|
2 sets
|
Control and monitoring systems
Humidity control
|
Adopt 5.7 inch temperature and humidity controller, touch high-precision temperature and humidity controller Chinese and English conversion, 240×80 point wide viewing angle, high contrast, large LCD display with backlight function, 1200Steps/120Parrerns. Computer connection 232 interface, temperature and humidity testCurve display, remote monitoring
|
Control precision
|
Temperature ±0.1℃, humidity ±1%R.H
Resolution: temperature 0.01℃ or humidity 0.01%R.H.
Temperature slope: 0.1~9.9℃ can be set
Humidity slope: 0~99%(RH) can be set
With upper and lower limit standby and alarm function
Two choices of temperature input signal: PT 100Ω or mv
Temperature conversion output: 10mv/1℃, 10mv/1%RH 9 groups of P.I.D control parameter settings, P.I.D automatic calculation Automatic temperature correction
|
Controller function
|
It adopts screen dialogue mode, no key input is required, and the screen directly touches the options Direct display of temperature and humidity setting (SV) and actual (PV) values
Can display the current execution program number, segment number, remaining time and cycle number
Operating cumulative time function
The temperature and humidity program setting value is displayed in a graphic curve, with real-time display program curve execution function
With a separate program editing screen, 5 sections of temperature and time can be input per page Fixed point or program action status display Chinese display
The screen can be adjusted for backlight
The screen display protection function can be set for timing, TIMER or manual shutdown The amount of programs that can be used: up to 120 groups
Usable memory capacity: 1200 segments
Repeatable commands: each command can be up to 999 times
The production of the program adopts dialogue style, with editing, clearing, inserting and other functions
With 2 sets of time signal output control (can control the ON/OFF action of the test object) Skip and hold function in program execution Time setting 0~99Hr59min With power-off program memory, it will automatically start and continue to execute the program after power is restored
With RS-232C communication interface
Graphical curve can be displayed in real time during program execution
With scheduled start and shutdown function With date and time adjustment function Button and screen lock (LOCK) function
|
Heating method
|
Efficient SUS316# stainless steel fin heating tube, making the machine safer
|
Temperature control
|
Pt100 platinum resistance temperature sensor
|
SPECIFICATION
Description
|
Programmable desktop constant temperature and humidity test chamber
|
Model
|
HM-TST-36-40N
|
Inner box sizemm
|
300×400×300 (W×D×H)mm
|
Temperature range
|
-40~100℃
|
Temperature rise and fall rate
|
1~3℃/min
|
Cooling rate
|
20℃∽-40℃ ≤60min
|
Heating rate
|
RT∽100 ℃≤30min
|
Humidity range
|
30~98%R.H
|
Temperature fluctuation
|
±0.5
|
Temperature deviation
|
±1℃
|
Humidity deviation
|
±3%R.H
|
Installation power
|
3KW
|
Space utilization
|
70%
|
Power supply
|
AC 220V 1PH 50/60HZ
|