HL series programmable constant temperature and humidity testing machine is used to test the performance of materials in various environments and test the heat resistance, cold resistance, dry resistance and humidity resistance of various materials. It is suitable for testing the quality of products such as electronics, electrical appliances, communications, instruments, vehicles, plastic products, metals, food, chemicals, building materials, medical treatment, and aerospace.
Feature
◆Appearance: High-quality appearance, the body adopts a circular arc shape, the surface is treated with matte stripes, and a flat non-reactional handle is used, which is easy to operate, safe and reliable.
◆Observation window: rectangular multi-layer glass viewing window, which can be used for observation of the test product in the test. The window is equipped with a sweat-proof electric heater device to prevent condensation and water droplets, and a high-brightness PL fluorescent lamp maintains the lighting in the box.
◆Water supply system: It has an external water supply system, which is convenient for supplementing the water supply of the humidifying barrel and automatically recycles it for use.
◆Compressor: The compressor cycle system adopts the French "Taikang" brand, which can effectively remove the lubricating oil between the condenser tube and the capillary tube and the whole series adopts environmentally friendly cold coal (R404, 507)
◆ Control mode: adopt smart PID + SSR / SCR forward and inverse two-way synchronization output, containing advanced slope of the control logic. ◆Controller: It has multi-segment program editing and temperature and humidity can be controlled quickly (OUICK) or slope (SLOP).
◆System capacity: 150 groups of programs × 1500 segments can be logged in, the number of segments can be divided arbitrarily, and the programs can be connected to each other freely.
◆Cycle setting: 9999×999 cycles can be executed, and 5 independent partial cycles can be cut out.
◆Time signal: 3 sets of timing control output interfaces, with 10 timing control modes, to facilitate the execution of external drive components start/stop timing planning.
◆Safety inspection: 15 full-featured system inspections to ensure the safe operation of the machine. Failure time, items and troubleshooting measures can be automatically displayed.
20%～98%RH (can be customized according to customer requirements: low humidity type can reach 5%RH)
Program control
120 groups of 1200-segment programming, 999 cycle settings, and multiple PID control functions, with RS-232 computer interface control.
Humidification system
Surface evaporative type, with additional protection against water shortage and power failure and overheating.
Dehumidification system
Freezing latent heat dehumidification method
Cooling system
-20℃ above adopts a one-element fully enclosed air-cooled refrigeration system, below -40℃ adopts a dual-element fully enclosed air-cooled refrigeration system
Water supply system
Built-in pure water generator, tap water can be directly added without manual water addition, and water shortage warning device is attached
Material inside and outside
SUS#304，Whole stainless steel
Insulation material
Rock wool and rigid PU foam insulation
Safety devices
No fuse switch, compressor overload, high cooling coal, over temperature, power failure, protection switch, temperature limit protection and fault alarm device
