DESCRIPTION
The rain test chamber is designed and manufactured in accordance with relevant national standards, and is widely used in aerospace, aerospace, military, naval, electrical, electronic and other industries to simulate dynamic operation of the whole machine and parts of the product in a rainy environment to evaluate the product Work quality test. In order to evaluate the performance and quality of the sample.
1. The structure design of the test system is advanced and reasonable, the manufacturing process is standardized, the appearance is beautiful and generous, and the maintenance is convenient. 2. The matching of parts and components is well matched. The main functional components are all imported parts with international advanced level, which improves the safety and reliability of the product and can ensure the long-term and high-frequency use requirements of users. 3. The ancillary conditions required for the normal operation of the equipment are already equipped, and the buyer only needs to provide the power and the working environment that meets the requirements.
The structure and working principle of the rain shower device
Working principle
This equipment uses a high-pressure water pump to sprinkle a certain pressure and a certain flow of test water on the sample through the swing rod nozzle, and rotate the test device to change the swing amplitude and frequency of the swing rod to reach the environment required by the test.
Structure of equipment
(1) The test box body is an integral structure, the rainwater tank, high-pressure water pump, and the rotating system of the test device are located in the lower part of the box, and the control system is located directly under the test box.
(2) The test box is a single door, sealed with double-layer anti-aging silicone rubber.
(3) There is an observation window on the door of the box.
(4) The equipment is equipped with switch-controlled lighting.
(5) Waterproof rotary joint and frequency conversion system are installed on the right side of the test box.
Equipment material
(1) The outer shell is sprayed with cold-rolled steel plate / the inner wall of the working chamber is formed by SUS304 mirror stainless steel plate.(2) Special motor, centrifugal convection fan
(3) The temperature measurement adopts imported PT-100 sensor.
(4) Silicone rubber sealing strip, imported waterproof sealing rotary joint
(5) Flow regulating valve and speed regulating motor.
(6) Sample holder and sample holder rotating structure, glass observation window.
(7) Rotation angle and frequency conversion control system.
INSTRUCTIONS FOR USE
Equipment usage conditions
| Project |
Description |
| Voltage |
Three-phase five-wire system 380VAC±10%; 50Hz±2% |
| Environment temperature |
5～35℃； |
| Environment humidity |
≯85%R.H |
| Atmospheric pressure |
86～106Kpa |
| Environmental conditions |
There is no strong vibration around the equipment site, no strong electromagnetic field interference, no high-concentration dust and corrosive substances, no direct sunlight or direct radiation from other heat sources. |
| The equipment should be placed horizontally in a well-ventilated test room, with sufficient space around it for operation and maintenance. |
Configuration
| Box |
structural style |
One-piece, the test box is integrated with the controller and the rain shower system. |
| shell material |
Electrostatic spraying of cold rolled steel sheet |
| Studio material |
SUS304 mirror stainless steel plate |
| Insulation Materials |
Rigid polyurethane foam |
| Control system |
Controller |
Intelligent touch screen program controller |
| Mainly implement electrical accessories |
Such as "Schneider" AC contactor, "Omron" intermediate relay, "Delixi" fuse and so on. |
| Safety devices |
1. Leakage and power failure, overcurrent protection;
2. Water pressure protection;
3. Overload fuse protection;
4. Grounding protection; When the control system detects the action of the following protective devices (single row), it should be able to automatically cut off the whole system and give an alarm. |
| Random Accessories |
1 power cord |
| Random document |
Schematic diagram/warranty card/certificate/instruction manual.
|
SPECIFICATION
|
Temperature range
|
room temperature
|
|
Bending radius of spray pipe
|
375mm
|
|
Inner diameter of spray pipe bend
|
16mm
|
|
Swing amplitude of spray pipe
|
60°、90°、135°
|
|
Nozzle hole diameter and spacing
|
0.4mm/50mm
|
|
Studio size
|
Depth 1000×width 1000×height 1000mm (appropriate size can be customized according to customer requirements)
|
|
Rain pressure
|
About 80Kpa～892Kpa
|
|
Adjustable water flow
|
Flow rate is 0.6L/min
|
|
Test bench area
|
￠350mm
|
|
Table rotation
|
1～17r/min
|
|
Diffusion hole diameter
|
About 1mm
|
|
Number of diffuser holes
|
About one hundred
|
|
Water spray distance
|
1m
|
|
Angle spray rod
|
0°～90°Adjustable
|
|
Nozzle spacing article
|
Not more than 250mm
|
|
Water supply
|
25.4L/min adjustable
|
|
Swing frequency
|
Advanced frequency converter speed regulation
|
|
It can meet the swing tube method (Rb2.1) and the hand-held sprinkler method (Rb2.2) in the water test
|
|
power
|
380VAC/4.8Kw three-phase five-wire power supply
|
|
fulfill the standard
|
GB/T2423.38-1990 GB4942-93 IEC60529 GB4208-2006 "Basic Environmental Test Regulations for Electrical and Electronic Products" Test R: Water test method IPX3 IPX4
|
|
AcceptanceCriteria
|
Environmental testing equipment testing method / technical agreement between the two parties
|
|
The above product operating technical data are measured at room temperature 25℃±5℃, relative humidity≤85%R.H, and no-load conditions.
|
Control System
| Project |
Description |
| Temperature measurement |
Pt100 platinum thermal resistance |
| Control instrument |
Color touch screen programmable controller; |
| Setting accuracy |
Temperature: 0.1℃, |
| Operation mode |
Constant (fixed-point control) and program |
| Power Control |
Using SCR zero-crossing trigger power adjustment technology, the control is reliable, no noise, and no grid pollution. |
1. Both the swing lever speed controller and the turntable speed controller adopt "Schneider" variable frequency speed controller;
2.The water pump/flow meter are all domestic brands.
3. Other electrical accessories are made of high-quality brand products: such as "Schneider" AC contactor, "Omron" intermediate relay, "Delixi" fuse, etc. |
Safety protection
1. This test box meets the national electrical safety standards, wiring specifications, and each wiring port is clearly marked, without being exposed;
2. The studio is absolutely insulated from each power source, safe and reliable;
3. Complete safety protection function (as follows); 1) Reliable grounding protection device; 2) Leakage/open circuit protection; 3) Water pressure protection; 4) Overload fuse protection;
