Xenon lamp aging chamber is a comprehensive climate test device. In addition to the climate aging test, it can also test the light resistance of high resolution materials, that is, the polymer materials are exposed to artificial light sources simulating the sunlight spectrum through the glass to evaluate the light resistance of the materials. Simulate and strengthen the experiment from the main climatic factors such as light energy, temperature, rainfall or condensation, and humidity; The xenon arc lamp simulating the full sunlight spectrum is used to reproduce the destructive light waves existing in different environments; It can be used for the selection of new materials, improvement of existing materials or evaluation of durability changes after material composition changes;
The material is tested by exposing the tested material to the alternating cycle of light and water under controlled high temperature. It uses xenon lamp tubes to simulate the radiation of sunlight, and uses condensation water and water spray to simulate dew and rain. This instrument only needs a few days or weeks to overcome the laboratory damage such as working conditions in the environment or aging of various parts and components that will take several months or even years to occur outside, These include fading, color change, cracking, cracking, wrinkling, blistering, embrittlement, strength reduction, oxidation, etc
Environmental test methods for military equipment - solar radiation method
GB12831-86 Vulcanized rubber weathering test method (xenon lamp)
GB/T1644.2-1999 Plastics Laboratory light source exposure test method (Part 2: Arc xenon lamp)
GB/T8427-89 Textiles - Tests for colour fastness - Colour fastness to artificial light - Xenon arc
GB/T8430-98 Textiles - Tests for colour fastness - Colour fastness to artificial light - Xenon arc
GB/T1865-97 Paints, varnishes, artificial weathering and artificial radiation exposure (filtered xenon arc radiation)
GB/T16991-97 Textiles - Tests for colour fastness - Colour fastness to light at high temperature: Xenon lamp
GB/T5137.3-96 Test methods for radiation, high temperature, humidity, combustion and simulated climate resistance of automotive safety glass
GB/T16259-96 Color building materials, artificial climate acceleration, color aging test method.
GB/T2423.24-95 Environmental Tests for Electronic and Electrical Products Part 2: Test Methods, Test SQ: Simulated solar radiation on the ground.
The material is tested by exposing the tested material to the alternating cycle of light and water under controlled high temperature. It uses xenon lamp tubes to simulate the radiation of sunlight, and uses condensation water and water spray to simulate dew and rain. This instrument only needs a few days or weeks to overcome the laboratory damage such as working conditions in the environment or aging of various parts and components that will take several months or even years to occur outside, These include fading, color change, cracking, cracking, wrinkling, blistering, embrittlement, strength reduction, oxidation, etc
It is applicable to plastic, rubber, paint, paint, ink, paper, medicine, food, cosmetics, textiles, auto parts, packaging materials, building materials, electric and electrical products, etc; Provide corresponding environmental simulation and accelerated test for scientific research, product development and quality control, and provide important test basis.
Studio size D × W × H
500*600*500mm
performance index
temperature range
RT+10℃~80℃
Humidity range
65～98%R·H
Rainfall time
1~9999 minutes, adjustable
Rainfall cycle
1-240 minutes, adjustable interval (break)
Spectral wavelength
290nm～800nm（60 w/m2）
Irradiation light source
Full spectrum xenon lamp (air-cooled)
Xenon lamp power
2.5 kw (life: 1600 hours)
Temperature and humidity operation control system
Time controller
Imported programmable time computer integrated controller (Jinzhong Moeller)
Accuracy range
Setting accuracy: temperature ± 0.1 ℃, humidity ± 0.1 ℃ R · H
Indication accuracy: temperature ± 0.1 ℃, humidity ± 0.1 ℃ R · H
Water supply system
The humidification water supply adopts automatic control, and the xenon lamp cooling circulating water
temperature controller
Imported microcomputer temperature and humidity integrated controller
humidity
30%~65% RH at irradiation, up to 90% RH at dark
