This test is specially designed to test the strength of various materials, finished products, semi-finished products and monomers.Various types of fixtures, jigs, can be used for tensile strength, compressive strength, flexural strength, elongation, elongation, tearing, peeling, stress , Strain, shear, etc., It is suitable for the food industry to measure the jacking strength, jacking deformation and compressive strength of packaging containers.Suitable for metal, packaging, food, aviation, rubber plastic, wire and cable, leather, chemical products and other industries.
Standards compliant
GB/T2792，ASTM D3330，GB/T 12914-1991，GB 13022-91，GB/T1040-92，GB2792-81，GB/T 14344-9，GB/T 2191-95，QB/T 2171-95
SPECIFICATION
| Capacity Selection |
10N、20N、50N、100N、200N、500N、1KN、2KN、5KN、10KN、20KN、50KN |
| Force Resolution |
1/500,000 |
| Strength Precision |
0.3% |
| Stroke Resolution |
1/500,000 |
| Test Items |
Tension, peeling force, pressure, bending resistance, stress, jacking strength, jacking deformation, tearing strength, tensile strength, etc |
| Control Method |
LED electronic display and operation |
| Test Distance |
200mm |
| Test Width |
300mm |
| Test Speed |
0.01～500mm/min，Arbitrary setting |
| Force unit switching |
kgf，gf ，N，kN，Ibf |
| Stress unit switching |
MPa，kKPa，kgf/cm2，Ibf/in2 |
| Deformation unit switching |
mm,cm,in |
| Stop Mode |
Servo motor drive, synchronous wheel and precision ball screw drive |
| Machine Drive |
Servo motor drive |
| Machine Weight |
About 55kg |
| Power Supply |
1PH，AC220V，50/60Hz，10A Or specify |
| Standard Configuration |
80mm (one set of pressure plate 、Safety sheet metal protecting cover and sensor) |
Test Standard: GB/T2792，ASTM D3330，GB/T 12914-1991，GB 13022-91，GB/T1040-92，GB2792-81，GB/T 14344-9，GB/T 2191-95，QB/T 2171-95
