Burn-in Environmental Temperature Aging Test Chamber

Burn-in Environmental Temperature Aging Test Chamber

Model No.︰HMBTG072-1000

Brand Name︰HarmonyWOLRD/OEM/ODM

Country of Origin︰China

Unit Price︰-

Minimum Order︰1 pc

Inquire Now

Product Description

Burn-in Chamber (also called the temperature aging test chamber) is widely applied for automotive parts, electronic and electric products, components and materials by constant high-temperature reliability tests.

 

Burn-in Chamber Application

DGBELL’s Burn-in Chambers are widely applied for automotive parts, electronic and electric products, components and materials by constant high temperature reliability test. It can also be used for other objects that need to be tested for high temperatures, such as drugs, airplanes, etc. Our burn-in test chamber can be customized according to your requirements, if you have special needs, don’t hesitate to contact us.

 

Burn-in Chamber Advantage

  1. SUS#304 high temperature resistant stainless steel
  2. Fire-resistant, high strength glass fiber thermal insulation material
  3. Control system and control circuit all introduced with the famous brand
  4. Double sides cold-rolled plate electrostatic powder-coated material

 

Standard

  • IEC 60068-2-2:2007

 

Performance parameters

Model HMBTG072 HMBTG125 HMBTG270 HMBTG600 HMBTG1000
Test Space 450x400x400 450x400x400 600x900x500 1000x1000x600 1000x1000x1000
W x H x D (mm)
External Dimension 850x1000x850 900x1100x1000 1000x1300x1000 1200x1450x1100 1200x1400x1450
W x H x D (mm)
Temp. Range Rt-250℃  (Optional for 500℃)
Temp. Fluctuation ≤±0.5℃
Temp. Deviation ≤±1.5℃
Temp. Uniformity ≤±1℃

 

Controller

Display TFT LCD
Input Compatible for wet-dry bulbs PT100 (T/C, RTD, DCV)
Accuracy 0.01% high precision sampling
System Capacity 10 programs, 100 segments for each program
Operating Mode Fixed value/ Programmable running mode
Output Method PID+SSR/SCR automatic bidirectional synchronous output
Start pre-set Equipment starting can be pre-set.
Communication Interface compatible with protocols (RS485, Modbus, etc.)

 

Construction Details

 panel In the test panel of the burn-in test chamber, you can enter the parameters you need here.
 specimen shelves The test rack is used to place the samples. There are many small round holes on the inner wall of the chamber, which are used for the left and right air supply so that the temperature in each corner of the chamber is the same.
 Test Port The test hole is used to connect external equipment. If you need to test the temperature of the sample inside, you need to probe into the thermometer from the outside, then you can go in through this hole. If you don’t need this hole, just plug this test hole.
 Vents The heat dissipation hole is used to exchange with the outside air to adjust the temperature of the inner chamber.

 

Product Image