Xenon Lamp Aging Test Chamber Environmental Chamber

Xenon Lamp Aging Test Chamber Environmental Chamber

Model No.︰HMCX1800C

Brand Name︰HarmonyWOLRD/OEM/ODM

Country of Origin︰China

Unit Price︰-

Minimum Order︰1 pc

Inquire Now

Product Description

DESCRIPTION

It is suitable for auto interior parts, plastic, paint, coating, E-Meter, textiles, printing and dyeing, dyestuff, decorative materials, wooden floors, safe hats, leathers, petrochemicals, rubber, ect., which is simulating the artificial aging of sunshine test and light resistance, climate resistance, perspiration&light resistance, ect. Though setting radiation energy, temperature, humidity, spray, light alternated with darkness and so on in the test chamber, to provide standard necessary for a simulation of natural environment  and then test the material of property evolution, such as fade, aging, soft, hard, break, etc.

 

FEATURES

 

  1. Exposure method: Adjust tray up and down, the tray is about 10 degrees tilt angle to prevent spraying water from samples.Three-dimensional space can test 3D specimens;
  2.  Light source system:Apply imported long arc xenon lamp, high-intensity, 1.8KW professional AC air-cooled xenon arc lamp;
  3.  Filter: Apply specialized filter components, and the filtered spectrum fully conform to GB, FZ, AATCC, ISO, JIS, ect.   
  1.  Irradiance control: Digital setting of light intensity , real-time monitor, self-regulation,meet the stability requirements of different standards for the test light source( can switch to 420nm, 340nm, 300-400nm or 300-800nm single-band monitoring)
  2.  Temperature control: Black-panel thermometer (BPT), Black-label thermometer(BST), can switch to air temperature (CHT) and test as the sample at the same station, which truly reflects the test condition of the sample , and tested data is displayed on color screen in the form of numbers, graphs, curves, ect. by CPU . No need to stop observing.
  3.  Humidity control:Energy-efficient Nanotechnology and PTC high temperature double humidification system, and minimal water consumption is 0.5L/min, and humidity test is accurate and stable.
  4.  Spray system: When the test need spraying, high pressure spray an umbrella spray. Stimulating natural rain effect, amount of rain is 0.4L/min.
  5.  Data output mode: The apparatus is equipped with a USB port, and the test data can be directly exported to the EXL table file and read on the computer by using the U disk.
  6.  Data display mode: 7-inch WEINVIEW super color touch screen display and control, support Chinese and English operation, multiple test monitoring modes(numbers, curves, forms), simply control, intuitive and clear.
  7. Standard setting: There are built-in 11 groups programs, which can adjust AATCC, ISO, GB, JIS, ect., and save permanently. Just choose to enter and start the trial.
  8. Energy conservation: Use brand-new USA technological aging chamber designed tech. The power of apparatus and noisy energy conservation of running parts are both low.
  9. Endurance running: A time of test can continuously run over 1,000 hours, satisfy material aging test of special field.
  10. Protection design: full safe monitor design can achieve unattended operation safely in the whole process.
  11. Remote monitoring: Support APP, computer network with remote monitoring control, which can save work time and simply operate.
  12. Monitoring interface: Friendly interface include monitoring picture, state monitor, running curve, ect. Phone and computer APP communication tech16.Lamp installation: Three original lamp tube are top installed, presenting 10°oblique irradiation down to sample holder. (as picture):

 

SPECIFICATION 

  1. Model: HMCX1800C
  2. Internal dimension : 490㎜×790㎜×400㎜(D×W×H)
  3. External dimension : 1130㎜×1020㎜×1800㎜(D×W×H)
  4. Lamp tube power: 1.8KW (air-cooled X-1800 original imported long xenon arc lamp)
  5. Lamp tube life: work 1600 hours
  6. Energy control point: @340nm、@420nm、@300nm~400nm、@280nm~800nm
  7. Radiation intensity: can switch control point:(indicate the need for strength control points when ordering)

0.25~0.55W/m2@340nm
0.45W/m2~1.10W/m2@420nm
29~69W/m2@300nm~400nm
450~1200W/m2@280nm~800nm

  1. Irradiation intensity adjustment method: fiber-optic and build-in sun eye, radiation intensity with closed-loop monitoring IPD self-regulation.
  2.  Filter: special glass filter have specific light transmittance, which can choose different combination to stimulate different environment.
  3. Cabinet temperature (CHT): 35~80℃ (adjustable)
  4. Black-panel temperature (BPT): 35~100℃ (adjustable)
  5. Black label temperature (BST): 35~110℃(adjustable)
  6. Temperature range: ±0.5°C
  7. Temperature evenness: ±3℃
  8. Humidity range: optical loop: 20~75%RH;  dark loop: 45~100%RH
  9. Humidity deviation: ±5%R.H
  10. Specimen tray: plate type 750mm×480mm
  11. Tray lean: 10°
  12. Specimen capacity: test standard finished sample and three-dimensional sample.
  13. The distance from center of arc to tray: adjustable
  14. Dark and light cycle: 0~9999H cycle setting  (e.g. 8H light, 4H dark)
  15. Spray cycle: 0~9999min cycle setting (e.g. spray 18min, stop 102min, adjustable cycle)
  16. Spray method: spray on the surface of sample.
  17. Lamp tube number: imported three lamp tubes.

 

Test Standard: 

GB/T16422.2-2014 Plastic laboratory light source exposure 

ISO 4892 Plastic laboratory light source exposure test method (Part 2: Arc xenon lamp)

ISO 11341 Color paint, varnish, artificial weathering and artificial radiation exposure (filtered xenon arc 

Payment Terms︰ TT / LC